This is a reptile/small animal hide I designed to attach to the inside of a terrarium or tank. Attaches very strongly with two suction cups.
Here's a link to the suction cups (The medium sized ones in the pack) I designed this to work with: https://www.amazon.com/gp/product/B0743F9H17/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I highly recommend coating the hide with some VOC free or low-VOC free paint to seal the plastic and to prevent mold or bacteria from growing in between the layers since this will be in direct contact with your animal buddy, and it will help prevent the plastic from absorbing and being damaged by moisture!
Here's a link to a reptile blog listing a few types of paints that are good to use: https://ourreptileforum.com/community/threads/safe-paints-and-finishes-for-reptile-enclosures.16098/
Update 3/4/23:
Upon suggestion of someone editing this to have a vertical opening and shallow hollow to hold a bit of water. Added two versions, one has a little ramp in it so they can climb in/out of the water in it
| Gecko_Hide1.3mf | 257.4KB | |
| Gecko_Hide1.stl | 720.9KB | |
| Gecko_Hide2.stl | 1.9MB | |
| Gecko_Hide2_1.stl | 1.9MB |
