SMA Spinner Finger Wrench For Diversity Receiver 3D Printer Model
The file 'SMA Spinner Finger Wrench For Diversity Receiver 3D Printer Model' is (stl) file type, size is 444.6KB.
The file 'SMA Spinner Finger Wrench For Diversity Receiver 3D Printer Model' is (stl) file type, size is 444.6KB.
There are many spinners available in this universe. But as you know: Too thick, surfaces I do not like, and many of them are not suitable to use with the diversity receivers due to a too big outer diameter. So, I have redrawn the orgin thing completely and resized the outer diameter to fit for Furious FPV True-D receivers also (smallest distance between SMA threads I know).
Most of the spinners I printed before need upscaling in order to make the hexagon big enough after shrinking of the material. Before you test and test again, please use SMA handle_110_108_106_104_102.stl (left to right) which includes versions of the spinner with the hexagon hole in mentioned percentage. After some tests I realised that the parts shrink different depending on the surface (never noticed this before). E.g. for ABS I need 104/106% when printed on the bed and 106/108% on a raft. Just print the 5in1 - afterwards you know which one you need and print the suitable separated one only.
| SMA_handle_100.stl | 138.2KB | |
| SMA_handle_102.stl | 138.2KB | |
| SMA_handle_104.stl | 138.2KB | |
| SMA_handle_106.stl | 138.2KB | |
| SMA_handle_108.stl | 138.2KB | |
| SMA_handle_110.stl | 138.2KB | |
| SMA_handle_110_108_106_104_102.stl | 690.5KB | |
| SMA_handle_112.stl | 138.2KB |
