Slot 45 Hangers And Accessories 3D Printer Model
The file 'Slot 45 Hangers And Accessories 3D Printer Model' is (stl) file type, size is 15.6MB.
The file 'Slot 45 Hangers And Accessories 3D Printer Model' is (stl) file type, size is 15.6MB.
These are brackets designed to be used with the slot 45 system by April Wilkerson. Search Slot 45 on YouTube if unfamiliar. This is an alternate system to French cleats, although the hangars would probably work fine with traditional French cleats as well. These are still in the prototype stage as this is a new system so let me know if you have any feedback or other ideas or choose to make a remix of your own. These are designed to work with a saw blade with kerf of 0.102 in (just under 1/8") and with #6 screws, The hangers are best printed vertically for maximum strength.
Update 2- Added a bracket for a tape rack with a 5/8 dowel, clips to hold a level or other tools, a revised bracket that has a tighter fit, and various sized pegboard adapters
Update 3- Added clips for holding Hammers and a simple hook
If you're interested in the Ryobi Tool holders you can find them here - https://www.thingiverse.com/thing:6810475
| 4_Pegboard_1_inch.stl | 3.7MB | |
| 4_Pegboard_2_Inch.stl | 5.8MB | |
| 4_Pegboard_3_Inch.stl | 8.3MB | |
| Hammer_Clip.stl | 2.6MB | |
| Hammer_Clip_Large.stl | 2.7MB | |
| Hanger_v3.stl | 2.0MB | |
| Hook.stl | 3.3MB | |
| Level_Clip.stl | 2.5MB | |
| S45_-_4mm_Backer.stl | 113.9KB | |
| S45_-_Hanger_Bracket.stl | 2.2MB | |
| S45_1-4_Dovetail.stl | 785.7KB | |
| S45_3-8_Dovetail.stl | 877.9KB | |
| Tape_Rack.stl | 4.4MB |
