SLIM - One of the best fpv racing drone frames developed in Poland (anyway, up to 2018)

This design was made in response of stopped production of original SlimV2 frame.
Original design was developed by Polish team RotoRacer - Thank you guys for this work!

The official manufacturer did not live up to their promise of share all source files to public.

Because of this, inspiring the original slim I decided to design all parts from scratch.
I believe, fpv drones was born as open source and shall remain so.

//Note//
Top and bottom plates don't have any holes to make it universal. Design them on your own.
All of this is made available for free. You can modify, customize, and share this design.

----- Compatible with legacy Slim V1 & V2 frames! -----

----- 3D prints for this frames - camera mounts, shark fins etc. -----

• Micro cam mount 20mm - https://www.thingiverse.com/thing:2929909
• Micro cam mount 25mm - https://www.thingiverse.com/thing:2929920
• Mini cam mount 25mm - https://www.thingiverse.com/thing:2929938
• Micro eagle cam mounts - https://www.thingiverse.com/thing:3010588
• Antena mount - https://www.thingiverse.com/thing:2934208
• GoPro Session mount - https://www.thingiverse.com/thing:2934211
• Foxeer Pagoda Pro mount - https://www.thingiverse.com/thing:3123601
• Shark fin - https://www.thingiverse.com/thing:2966787
• Shark fin lollipop - https://www.thingiverse.com/thing:3233058

----- Every part is avalaible in STL, STEP and DWG formats ------

For now, there is done:

• Arm true-x for 5", 6", and 7" props - 2mm longer than original
• Arm stretched 5" - Rev.1 - probably will be slightly improved
• Bottom plate - raw without hole structure, have longer arm-holding part
• Middle plate - for 30.5mm stack
• Top plate - raw without hole structure
• Horizontal reinforcement barre for 5" arms
• !!! NEW !!! Experimental Micro Eagle mount; reduced angle by -10deg (~45 now)

Still to do:

• Stretched arms - 6 inch
• Nice vent holes for top plate :)
• Carbon-cam-cage version
• Single-arm version ... in progress ...

----- Manufacturing tips -----

• Plates - minimum 1.5mm - 2mm carbon
• Arms 5" - minimum 4mm - 5mm carbon
• Arms 6" and 7" - minimum 6mm carbon
                                     
                                     

----- Also, check out other great open hardware frames! -----

Tempest V2 by thunkar: https://www.thingiverse.com/thing:3356452
Tiny Tempest by thunkar: https://www.thingiverse.com/thing:3716984

Enjoy hobby,
FreeFPV