Slim Raspberry Pi 2/B+ Case 3D Printer Model Free Download

Description Files (4)

Summary

YARC! - Yet Another Raspberry Case

there are many options for a raspberry pi case on thingiverse - but none quite covered all the features I was looking for... so time to design one :-)

Updates
2015-03-25 added top with groove for CSI ribbon cable and another with CSI+GPIO

there are variants:
for M2.5 screws
completly screw-less snap-together

this case tries to be:

slender and snugly fitting around the pi
low profile/height
not bulky: walls are as thin as possible, but as thick as necessary to be sturdy enough
closed, to keep dust out (the pi doesn't run that hot anyway...)
two parts - lower part acting as coaster
assembled with readily available parts: easy to come by M3 screws
easy to disassemble - using the mounting holes with easy to come by M3 screws (countersunk M3x16mm) and set-in M3 nuts
not occlude the status leds
printable without any support structures

Note: this requires the "mounting" holes to be widened to accommodate the bigger screw - which the raspberry foundation discourages since it might damage the pcb!

raspberry2_case_bot.stl	130.4KB
raspberry2_case_top.stl	223.9KB
raspberry2_case_top_camera.stl	181.4KB
raspberry2_case_top_camera_gpio.stl	172.2KB

Slim Raspberry Pi 2/B+ Case 3D Printer Model

Summary

Tags

You might also like