A sliding tray to add extra storage capacity. Designed to fit drawers that are 10.75 inches deep. Can be used in any length drawer, just cut rods to desired length. The connector piece gets super-glued at the joint of the two pieces to increased strength.
One version uses a plexiglass bottom with 18 3mm countersunk screws and 4 4mm countersunk screws. 12 3mm nuts are needed, and 4 4mm nuts. The hole locations are included as a dxf file.
The other version only needs 8 4mm screws and nuts to mount the rod support pieces.
Rods: https://www.amazon.com/gp/product/B08TBDJ866/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Bearings: https://www.amazon.com/gp/product/B087WPGQ8T/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Plexiglass: https://www.amazon.com/gp/product/B083XF431P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I've included STEP files to allow modifications for your specific needs just in case.
| Connector.stl | 243.7KB | |
| Connector.stp | 9.8KB | |
| Drawer_Shelf_Bearing_Mount.stl | 589.3KB | |
| Drawer_Shelf_Bearing_Mount.stp | 223.9KB | |
| Drawer_Shelf_Bearing_Mount_No_Bolts.stl | 435.6KB | |
| Drawer_Shelf_Bearing_Mount_No_Bolts.stp | 113.1KB | |
| Drawer_Shelf_Hole_Locations.dxf | 265.9KB | |
| Drawer_Shelf_Rod_Support.stl | 173.8KB | |
| Drawer_Shelf_Rod_Support.stp | 37.8KB |
