Sliding Tray For IKEA ALEX Drawer Units 3D Printer Model
The file 'Sliding Tray For IKEA ALEX Drawer Units 3D Printer Model' is (stl) file type, size is 561.00 KB.
The file 'Sliding Tray For IKEA ALEX Drawer Units 3D Printer Model' is (stl) file type, size is 561.00 KB.
I made this tray for some of the tools I use regularly.
Option 1: If you have a printer that is capable of printing parts that are 320 mm wide you only have to print the Complete.stl
You will also need 4 Self-adhesive felt pads, about 3 mm thick
It needs to be printed with supports. Please bear in mind that I couldn't test print that thing so I'm not absolutely sure if it will work properly. A "Make" would be nice
Option 2: If you don't have suche a big printer, you can print all the other files and will need some additional parts:
1 piece of plywood 288 x 140 x 6 mm
4 Screws M3 x 10 mm
4 Nuts M3
4 Self-adhesive felt pads, about 3 mm thick
The bit holders fit 6,3 mm and 4 mm bits.
Slider.stl, Rail.01.stl and Rail.02.stl are needed to be printed 2 times
| Bit.Holder.4mm.STL |
| Bit.Holder.63mm.STL |
| CompleteTray.STL |
| Rail.01.STL |
| Rail.02.STL |
| Slider.STL |
