Sliding Hook Rack 3D Printer Model
The file 'Sliding Hook Rack 3D Printer Model' is (stl) file type, size is 24.8KB.
The file 'Sliding Hook Rack 3D Printer Model' is (stl) file type, size is 24.8KB.
Sliding rail/rack with hooks. I designed this with the following parameters 1) to be mounted horizontally 2) the hooks can quite easily be removed without having to sliding them to the end (for reorganization. just lift up to pop them out) 3) slide easily 4) scalability and 5) easy to print. I couldn't find any other designs (or commercial products) that could do the same. The initial design was for neckties, but I can imagine several other uses. Can be mounted with small wood screws ( I used 15mm long screws with 6mm diameter heads). This won't hold much weight fyi.
Printed on an ender 3 s1 plus with recycled PLA at .2mm layer height, 10% infill, 210℃, Build plate at 60℃. Designed in Sketchup Free.
Sliding rail is 200mm long, hooks are 15 mm wide x 50mm long.
Drop me a tip if you're so inclined. :)
| 12_hooks.stl | 38.8KB | |
| rack_for_hooks.stl | 25.4KB | |
| rail_with_12_hooks.stl | 64.1KB | |
| single_hook.stl | 3.3KB |
