Sliding Door Looking rod holder. This can be used for home security or childproofing.
Two J-hooks are shown, but only one is really needed. Holes are 7/8" dia made for a 3/4" wooden dowl rod.
I applied mine with double sided tape. I have also included mounts with screw mounting.
Be sure to test that you can get the rod in and out before you screw/tape it down if you are mounting to the top of the door frame.
I made a handle but did not print it. Even a shortish adult can usually reach the stored rod at the top of a door frame. It could be used so you don't have to bend over as far if you're mounting it near the floor though.
| HOOKSTORAGE2.stl | 830.3KB | |
| ROD_HANDLE.stl | 792.7KB | |
| ROD_HOLDER-VERT_STORAGE.stl | 4.9MB | |
| ROD_HOLDERCLOSED-0.13_BOTTOM_STEP.stl | 1.2MB | |
| ROD_HOLDERCLOSED.stl | 888.4KB | |
| ROD_HOLDERCLOSED_WITH-2-HOLES.stl | 1.1MB | |
| ROD_HOLDEROPEN.stl | 515.6KB | |
| ROD_HOLDEROPEN_W-HOLES.stl | 1.0MB |
