Sliding Belt Tensiones For Mercury One.1 ZeroG 3D Printer Model
The file 'Sliding Belt Tensiones For Mercury One.1 ZeroG 3D Printer Model' is (stl,step) file type, size is 780.9KB.
The file 'Sliding Belt Tensiones For Mercury One.1 ZeroG 3D Printer Model' is (stl,step) file type, size is 780.9KB.
Sliding tensioners to easily and quickly adjust the belt tension without having to unscrew the main tensioning tower.
The main body is fixed to the frame while the tension can be adjusted by the 20mm M3 screw in the middle and the spring is responsible for containing the rebound that can occur in the belt due to the movement of the machine.
The spring goes between the sliding tensioner and the cap working as a spring loaded screw (20mm M3).
The 5mm dowel pins must be shortened to 23.5mm.
Necessary hardware:
The print settings are the same as what zerog recommends
| left_cap.stl | 365.7KB | |
| Left_sliding_tensioner.step | 334.5KB | |
| main_left.stl | 412.2KB | |
| main_right.stl | 541.7KB | |
| right_cap.stl | 362.2KB | |
| Right_sliding_tensioner.step | 464.9KB | |
| slider.stl | 606.1KB |
