This converts a small microswitch into a slide switch. It's designed to suit a 20mm wide microswitch (20mm x 10mm x 7mm / 0.78" x 0.4" x 0.3") with 2.5mm diameter mounting holes.
The overall size of the printed switch body is 40mm x 30mm x 15mm, and it has two 4mm mounting holes, which would be suitable to mount directly to 2020 extrusion. The top can be secured with M3 screws and nuts, and there's also a 4mm hole in one side for cable access.
| latching_microswitch.skp | 581.3KB | |
| lms_01_base.stl | 53.6KB | |
| lms_01_lever.stl | 2.2KB | |
| lms_01_top.stl | 30.4KB |
