The file 'Slide On Phone Mount For Permobil Wheelchair Joystick 3D Printer Model' is (stl) file type, size is 726.3KB.
Phone mount that slides over the joystick of the wheelchair, allowing for a quick setup. Permobil uses two different joystick modules (PJSM and CJSM2). The main difference is the CJSM2 version has 2 extra buttons and larger screen compared to the PJSM. One of the pictures shows the difference.
PJSM 3 Versions (CJSM2 does not currently have a "fixed" version)
1) Fixed Position (* Please note this may increase your w/c width turning tight turns, i.e. door ways)
2) Side Mounted - (Right or Left)
3) Height and Angle Adjustable (Picture shows one link of loc-line, but additional loc-line can be used for desired height) -
Parts required:
Print Settings:
Printed on Bambu Lap X1C/P1S
Recommend PETG for extra strength - print as oriented
If using support - should only fill in the bottom indentations for the 3/4" fixed loc-line mount
Gyroid Infill pattern will provide the best appearance and better strength if using PETG
75-80% infill
Above settings work well with Bambu Lab X1C and P1S. Tolerances should be allow the phone mount to slip on/loff easily, but not too loose that it rattles.
Parts Required:
1) Plastic Tripod Cell Phone Holder Adapter - One brand on Amazon is call "Vastar", but there are many similar generic versions - The anti spinner 3D printed adapter tested on this version specifically. Threadlocker can also be used instead.
2) 1/4"x20 x 5/8" Screw Pan Head Phillips (**side mounted requires shorter 3/8" 1/4x20)
Tools - Phillips Screwdriver, Right angle Phillips Screwdriver will make it easier for the side mounted version (but not necessary)
Please note this is not a remix of another model. The slide on Joystick concept is not new. There are other similar styles of phone mounts that can be found online.
Anti_Spinning.stl | 171.2KB | |
CJSM2_adjustable.stl | 518.9KB | |
CJSM2_Left_Joy.stl | 186.6KB | |
CJSM2_Right_Joy.stl | 186.6KB | |
PJSM_adjustable.stl | 406.9KB | |
PJSM_Fixed.stl | 281.6KB | |
PJSM_Left.stl | 205.4KB | |
PSJM_Right.stl | 205.5KB |