Designed this because I couldn't find one that used a 624ZZ bearing and I had a bunch laying around.
No supports needed.
Requires:
-1 624ZZ Bearing
-1 M4x16 machine screw
-1 M4 nut
Printed out of PETG but would probably be fine in PLA
| Base.stl | 71.6KB | |
| Carrier.stl | 164.1KB | |
| Filament_Guide.step | 121.5KB | |
| Guide.stl | 74.3KB | |
| Spacer.stl | 35.6KB |
