Sleigh Puzzle Ornament 3D Printer Model
The file 'Sleigh Puzzle Ornament 3D Printer Model' is (pdf,stl) file type, size is 28.2MB.
The file 'Sleigh Puzzle Ornament 3D Printer Model' is (pdf,stl) file type, size is 28.2MB.
Sleigh Puzzle Ornament
This model is created for the ornament challange of 2023. The idea was to make a (simple) puzzle/minature ornament of a sleigh. There are 2 versions, one made for a more accurate printer with good adhesion and one for a printer that is less accurate and were people might experience adhesion problems. My suggestion is to try and print version 2 first.
Version 1 - made with more tolerance and better adhesion on bed.
Version 2 - better and tighter fit, but needs an accurate printer.
Both version come with different sides, so you can change the model to your liking.
Only certain parts need to be changed when switching version, they are indicated with V1 or V2. The rest of the parts are universal. See the pictures for more details.
Technical information:
You can print all the parts at once, which i have done several times. But for the best results I would advice to print the V1_middle and/or V2_middle seperatly. That way the lower parts don't need to be on the bed longer as needed, especially if you use a heated bed.
| Assembling_Sleigh_Puzzle_Ornament.pdf | 2.0MB | |
| Bench_back.stl | 30.2KB | |
| Bench_seat.stl | 25.3KB | |
| Bench_trunk.stl | 5.4KB | |
| Runner.stl | 241.3KB | |
| Runner_mid.stl | 55.0KB | |
| V1_Middle.stl | 1.6MB | |
| V1_side_L.stl | 6.9MB | |
| V1_side_L_color.stl | 285.0KB | |
| V1_side_L_color_edge.stl | 5.1MB | |
| V1_side_L_Letters.stl | 7.1MB | |
| V1_side_R.stl | 6.9MB | |
| V1_side_R_color.stl | 286.3KB | |
| V1_side_R_color_edge.stl | 5.1MB | |
| V1_side_R_Letters.stl | 7.1MB | |
| V2_Middle.stl | 3.3MB | |
| V2_side_L.stl | 6.9MB | |
| V2_side_L_color.stl | 371.8KB | |
| V2_side_L_color_edge.stl | 5.1MB | |
| V2_side_L_Letters.stl | 7.1MB | |
| V2_side_R.stl | 6.9MB | |
| V2_side_R_color.stl | 2.2MB | |
| V2_side_R_color_edge.stl | 5.1MB | |
| V2_side_R_Letters.stl | 7.1MB |
