Sleeve Kings Size E Card Boxes 3D Printer Model
The file 'Sleeve Kings Size E Card Boxes 3D Printer Model' is (stl) file type, size is 16.3KB.
The file 'Sleeve Kings Size E Card Boxes 3D Printer Model' is (stl) file type, size is 16.3KB.
This project is very much a work in progress. Test print photos will be added as needed.
This set is for the Size E sleeve only.
The full range of Sleeve Kings compatible card boxes is intended. Starting with Size A at varying heights. Larger cards will have taller boxes.
When each size is completed, the files will be added here. Test prints will be posted. Only the shortest of each will be printed to check for fit where possible. I don't have access to the full range of sleeves.
My gaming group has found that having cards in these, stacks far easier for both storage, and for putting out a stack of cards which don't slip all over the place as sleeved stacks tend to.
All card sleeves available from https://sleevekings.com/
Not affiliated and don't receive any gratuity from Sleevekings. All card names and dimensions are direct from Sleevekings.
| Sleeve_Kings_Size_E_10mm_Base.stl | 14.8KB | |
| Sleeve_Kings_Size_E_10mm_Lid.stl | 1.4KB | |
| Sleeve_Kings_Size_E_20mm_Base.stl | 14.8KB | |
| Sleeve_Kings_Size_E_20mm_Lid.stl | 1.4KB | |
| Sleeve_Kings_Size_E_30mm_Base.stl | 14.8KB | |
| Sleeve_Kings_Size_E_30mm_Lid.stl | 1.4KB | |
| Sleeve_Kings_Size_E_40mm_Base.stl | 14.8KB | |
| Sleeve_Kings_Size_E_40mm_Lid.stl | 1.4KB | |
| Sleeve_Kings_Size_E_50mm_Base.stl | 14.8KB | |
| Sleeve_Kings_Size_E_50mm_Lid.stl | 1.4KB |
