I realized for a Christmas decoration that I put on top of my chimney (glued with double-sided or paste to fixed) a sled with gifts inside and reindeer pulling the hitch .
the sled is 15 cm wide, 8.3 cm long and 8 mm thick
the reindeer is 13 cm wide 15 cm long and 5 mm thick
the bow of the gifts measures 2 cm by 2 cm 4 mm thick
the gifts without the knot measure 3.3 cm by 3.5 cm by 4 mm thick
I added the city below the sledge length 19 cm by 12 cm wide and 2 cm thick (on the picture I put three)
I wish you a beautiful Christmas decoration and all my wishes of happiness, joy, gifts during these holidays
3D PRINTING PARAMETERS
filling rate 30%
80% printing speed
pla 215 ° (on the photo pla natural)
thicknesses above 0.2
layer thickness 0.2
shell thickness 0.8
no support
printing time for a reindeer 1 h 3 min
printing time for the sled 1 h 22 min
printing time for the bow of the gifts 4 min
printing time for gifts without the knot 8 min
printing time for the city 1 h
| cadeauu_sans_noeud.stl | 17.4KB | |
| noeud.stl | 28.3KB | |
| ombre_dune_ville.stl | 171.4KB | |
| renne.stl.stl | 45.0KB | |
| traineau.stl.stl | 19.8KB |
