These organizers specifically work well with ProSlat Vinyl Slatwall. May work with others.
The 2PartMountWallSide part works with Waltorg's monitor mount: https://www.thingiverse.com/thing:4314326 . His hook side did not fit my ProSlat.
Can Holder holds 4 Spray size cans
Caulk Holder holds 4 Caulk Tubes
Can Gallon Holder holds a typical rectangular gallon metal can
Larger Caulk Holder holds 7 tubes, but needs a pretty large printer (just fits diagonally on my 310mm bed)
Keyboard Shelf, you need 2 to hold a keyboard
PCHolder1, will hold a small computer: 65mm x 140mm x 175mm
TestFit is a small print that you can use to test fit of these parts in your slatwall without committing to a bigger print.
Can/Caulk holders diamond shaped openings are to reduce filament needed without needing support for the holes. But they still need support to print the hook. The large slots in the floor of these holders helps reduce issues with warping pulling the ends of the print off the bed.
Feb 7, 2023: Made gallon can holder a little bigger so slightly bent cans will fit. Added PCHolder1.
Feb 23, 2023: Added Cord Holders in Large (Electric cords) and Medium (CAT5 and such)
Sep 9, 2024: I had uploaded the wrong file for the Can Holder (had duped the caulk holder). Fixed. The can holder holds typical spray paint/brake cleaner/etc.
| 2PartMountWallSide.stl | 289.3KB | |
| CanGallonHolder.stl | 938.2KB | |
| CanHolderX3.stl | 322.7KB | |
| CanHolderX4.stl | 952.2KB | |
| CaulkHolderX4.stl | 529.3KB | |
| CaulkHolderX7.stl | 790.5KB | |
| CordHolderLarge.stl | 522.6KB | |
| CordHolderMedium.stl | 375.8KB | |
| HardwareBucketLG.stl | 75.5KB | |
| HardwareBucketSM.stl | 58.0KB | |
| KeyboardShelf.stl | 140.8KB | |
| MouseHolder.stl | 610.6KB | |
| PCHolder1.stl | 144.6KB | |
| TestFit.stl | 28.3KB | |
| ZipTieHolder.stl | 86.2KB |
