SLA Platform Roller 3D Printer Model
The file 'SLA Platform Roller 3D Printer Model' is (STL) file type, size is 35.2MB.
The file 'SLA Platform Roller 3D Printer Model' is (STL) file type, size is 35.2MB.
Roller for 3DSystems ProJet series SLA build platforms. Will also work on any platform with the same hexagonal pattern of 1/4" holes spaced 1/16" apart. I typically use it after platforms are cured when the stuck supports are extra crunchy so that they come out clean. It can be used after a scrub in alcohol to avoid stickiness, but the supports will usually be softer then.
Printed in 3D Solutech PLA on a 2016 Flashforge Creator Pro.
| Crossbar_v2.STL | 18.2MB | |
| Handle_v3.STL | 2.4MB | |
| Screw_v2.STL | 7.1MB | |
| SLA_Roller_v2.1.STL | 68.2MB |
