Sky Booster/Router Plug Shelf 3D Printer Model
The file 'Sky Booster/Router Plug Shelf 3D Printer Model' is (stl) file type, size is 240.0KB.
The file 'Sky Booster/Router Plug Shelf 3D Printer Model' is (stl) file type, size is 240.0KB.
Spent 6 months with the kids kicking my booster down the stairs when they came downstairs, finally decided to sort the issue.
It utilises a 3mm back plate sandwiched between the plug accessory and the socket.
It allows venting too from underneath to help keep the booster cooler than stock.
I did notice that certain plug sockets are different measurements between the centre pins so please measure yours before committing to a print.
Mine are 84mm between the middle of the earth pins, pictured above, and 32mm from the top of the earth pin to the top edge of the socket.
I printed the shelf vertically and it came out really well, the plug plates came out well but in hindsight I would have printed them on their side to increase their structural integrity.
| Booster_Shelf.stl | 790.6KB | |
| Plug_Plate.stl | 236.9KB |
