Skull Island Dice Tower 3D Printer Model
The file 'Skull Island Dice Tower 3D Printer Model' is (stl) file type, size is 29.9 MB.
The file 'Skull Island Dice Tower 3D Printer Model' is (stl) file type, size is 29.9 MB.
Updated the fantastic model by Kijai as a dice tower. Resculpted the interior and added new stone stairs. Closed off the tunnels to keep dice from getting back in the recesses. Carved out the interior for hidden cave reveal - this is both functional terrain as game accessory and to reduce PLA filament during printing.
Includes 100% scaled (185mm height) and one at 60 percent (112mm height). I printed the 60% model at 15% infill using 180g of material w/o supports and had a total print time of just under 7 hours. The 60% scaled size worked well for smaller D6 dice. A D20 can work but occasionally gets stuck in the center hole - just call that a Critical Fail ;)
There are still a few areas in the rubble that have hidden geometry, due to boolean additions/subtractions, that I wasn't able to remove however Netfabb didn't detect any mesh issues and the model is suitable for printing.
| skull_island_volcano_DiceTower_REPAIRED.stl |
| skull_island_volcano_DiceTower_REPAIRED_scaled60percent.stl |
