Skull Island Castle Lookout Tower – Dice Tower 3D Printer Model
The file 'Skull Island Castle Lookout Tower – Dice Tower 3D Printer Model' is (STL) file type, size is 131.2MB.
The file 'Skull Island Castle Lookout Tower – Dice Tower 3D Printer Model' is (STL) file type, size is 131.2MB.
This is giant dice tower. It is a remix from the Skull Island dice tower and also a free model I found on MyMiniFactory called The Lookout Tower by Jukka Seppänen.
https://www.myminifactory.com/object/3d-print-54889
There are some other misc pieces I assembled together to create the 'Jagged Rocks' addition and the stairs. The 'Jagged Rocks' are optional and can be printed with the skull island or separately. They will snap on the skull island if printed separately. They do aid in keeping the dice from flying across the table. I spent a lot of time tweaking the model and making small changes here and there. I found some errors on the other models and corrected those on this model.
I am printing the stairs with a clear filament so that I can use a LED at the base to light up the tower.
If I can I will upload some pictures of the finished tower after I paint everything.
| Castle_Bottom.STL | 6.5MB | |
| Castle_Middle.STL | 7.4MB | |
| Castle_Stairs_Base.STL | 155.6KB | |
| Castle_Stairs_Bottom.STL | 5.0MB | |
| Castle_Stairs_Cap.STL | 226.7KB | |
| Castle_Stairs_Middle.STL | 5.0MB | |
| Castle_Stairs_Top.STL | 5.0MB | |
| Castle_Top.STL | 9.5MB | |
| Complete_Dice_Tower.STL | 107.5MB | |
| Skull_Island_Jagged_Rocks.STL | 24.3MB | |
| Skull_Island_Main.STL | 44.3MB | |
| Skull_Island_w_Jagged_Rocks.STL | 68.7MB |
