Skimmer For Pond Or Pool 3D Printer Model
The file 'Skimmer For Pond Or Pool 3D Printer Model' is (STL) file type, size is 3.3MB.
The file 'Skimmer For Pond Or Pool 3D Printer Model' is (STL) file type, size is 3.3MB.
You can find here the components needed to build a pond or pool skimmer.
Additionally, you will need a pipe which will act as a connector between the base and the floating cap.
For this project, use a pipe with the following diameters:
Inner Diameter: 104.2 mm
Outer Diameter: 110 mm
You can easily use a gutter pipe.
In the floating cap, I have prepared a hole where you can put sand to adjust the weigth. This is needed because of different pump powers. Once you adjust the weight of the cap, you can seal the hole.
The base has a connector for a hose with a diameter of 32 mm.
I have uploaded two baskets. One is only with supports for an additional net, and the other has prepared holes. The holes are 4 mm.
If you have any questions, please feel free to ask. I would be glad to receive any suggestions on how I can improve this project.
| Base.STL | 845.7KB | |
| Basket_01.STL | 751.5KB | |
| Basket_02.STL | 8.4MB | |
| Floating_Cap.STL | 885.0KB | |
| Handle.STL | 13.2KB | |
| Pipe.STL | 21.6KB |
