Skimmer for Aquael ASAP300 filter

This is a modification of the excellent, simple, and affordable filter from Aquael. It enables the collection of surface water impurities.

The modification consists of a new pump housing (compatible with the original suction cups), a connection nozzle with an elbow (adjustable rotation angle), a 180-degree elbow, a suction tube, and two versions of intake floats (with optional shrimp protection).

The newer version of the float (with larger inlets) has greater buoyancy - requiring additional weight (see photos, weight of my piece of rock is 2.2g). This "feature" allows you to remove the weight during fish feeding, so the skimmer doesn't steal food from the fish. After feeding, place the weight back, and the skimmer will resume cleaning the water surface.

Both floats come with shrimp protection; print them and simply press them into the float.

Inside the pump housing, I added rails to adjust the suction force of water from outside of the skimmer. If all the holes in the housing are uncovered, the skimmer will not work correctly. This adjustment lets you fine-tune the suction power based on the type of filtration media used in the filter. In my case, the side inlets are completely covered, and only one grid is open at the front inlet. The covers were made from an old plastic card.

Printing:

Pump Housing:
Place the housing on its base, print with support (support for the intake grids).

Floats:
Place upside down and print with support (required for the inlet ribs).

Shrimp Protector:
Place upside down and print without support.

Elbow and Tube:
Print on the side without support.

Connection Nozzle:
Print flange down without support.

Material:
Fiberlogy Easy PETG
Temperature: 220°C
Nozzle: 0.4mm
Layer Thickness: 0.16mm

Important Information

Always follow the instructions provided in the filter's user manual. According to the filter's user manual, using this modification may void the warranty on the filter. All work should be carried out after disconnecting the filter from the power supply.

Legal Note

I am not affiliated with Aquael in any way. The use of the Aquael name is for informational purposes only. This product is a modification of the Aquael ASAP300 filter and is not an official product of Aquael. All trademarks and names are the property of their respective owners. This modification is provided as-is without any guarantees or warranty. Use of this modification is at your own risk, and I am not responsible for any damages or issues that may arise from its use.