Skammr – Airsoft Sawed Off Shotgun 3D Printer Model
The file 'Skammr – Airsoft Sawed Off Shotgun 3D Printer Model' is (stl) file type, size is 1.2MB.
The file 'Skammr – Airsoft Sawed Off Shotgun 3D Printer Model' is (stl) file type, size is 1.2MB.
Uses 2 PPS or Madbull SS6 shotgun shells.
You will need epoxy glue, m3 nuts and bolts and 2 springs.
This gun has a barell lock (you might need to cut the thing in 2 to install it sorry :)
Like my stuff ? Follow me !
Love it ? Tip me :)
COMMERCIAL LICENSE AVAILABLE CONTACT ME FOR MORE INFO
| 001_Plaquette1.stl | 108.2KB | |
| 002_Plaquette2.stl | 112.9KB | |
| 003_Receiver01.stl | 141.4KB | |
| 004_Receiver02.stl | 141.4KB | |
| 005_Main.stl | 89.9KB | |
| 006_Canon01.stl | 108.1KB | |
| 007_Canon02.stl | 82.7KB | |
| 008_Lock_you_may_need_to_cut_this_in_2.stl | 137.4KB | |
| 009_Pontet.stl | 7.3KB | |
| 010_Chien001.stl | 59.8KB | |
| 011_Chien002.stl | 59.8KB | |
| 012_Detente1.stl | 39.0KB | |
| 013_Detente2.stl | 39.0KB | |
| 014_poignee1.stl | 861.5KB | |
| 015_poignee2.stl | 861.5KB | |
| 016_tige.stl | 9.5KB | |
| 17_Pommeau.stl | 146.4KB |
![Male Regulator Cap [1/2 NPS -14 Thread] 3D Printer Model](https://res.3axis.co/a0abfa41-b681-4972-865e-dcc10df663f1/images/f0ef2d60-a447-4831-bc64-d5a81daf8e9e_thumb.jpg)
