I mounted a lot SKADIS Bins to the door of my BESTA shelf. Because there is nothing to secure the Bins it happened that one or more bins fell to the floor. That is annoying. That is why I made small magnet holders that are glued with double sided tape to one side of the bins. At the other side of the holder is a self-adhesive magnet mounted that clings to the steel sheet made counterpart.
You can use other magnets or double the amount of magnets to fit your needs. I used Ø10 x 0,6 mm magnets, if your magnets need double sided tape I would take 3M 300LSE.
See how it works
| SKADIS_Bin_Ø10x06_Magnet_Holder.stl | 63.5KB | |
| SKADIS_Bin_Ø10x06_Magnet_Holder.stp | 34.3KB |
