SKÅDIS Mushroom Shelves 3D Printer Model
The file 'SKÅDIS Mushroom Shelves 3D Printer Model' is (stl) file type, size is 44.8MB.
The file 'SKÅDIS Mushroom Shelves 3D Printer Model' is (stl) file type, size is 44.8MB.
Mushroom Shelves for IKEA SKÅDIS pegboards, 40–200% scale
Assembly: Put some CA glue (super glue) in the holes and insert the pegs. I recommend gel super glue.
40, 60, and 80% scale use a single peg, so they're decorative only. Use “peg_short” for these.
100–200% scale use two pegs, and can support some weight! Use “peg_long”.
| peg_long.stl | 378.4KB | |
| peg_short.stl | 466.5KB | |
| shelf_1_100.stl | 3.3MB | |
| shelf_1_120.stl | 3.3MB | |
| shelf_1_140.stl | 3.3MB | |
| shelf_1_160.stl | 3.3MB | |
| shelf_1_180.stl | 3.3MB | |
| shelf_1_200.stl | 3.3MB | |
| shelf_1_40.stl | 3.3MB | |
| shelf_1_60.stl | 3.3MB | |
| shelf_1_80.stl | 3.3MB | |
| shelf_2_100.stl | 4.1MB | |
| shelf_2_120.stl | 4.1MB | |
| shelf_2_140.stl | 4.1MB | |
| shelf_2_160.stl | 4.1MB | |
| shelf_2_180.stl | 4.1MB | |
| shelf_2_200.stl | 4.1MB | |
| shelf_2_40.stl | 4.1MB | |
| shelf_2_60.stl | 4.1MB | |
| shelf_2_80.stl | 4.1MB | |
| shelf_3_100.stl | 1.6MB | |
| shelf_3_120.stl | 1.6MB | |
| shelf_3_140.stl | 1.6MB | |
| shelf_3_160.stl | 1.6MB | |
| shelf_3_180.stl | 1.6MB | |
| shelf_3_200.stl | 1.6MB | |
| shelf_3_40.stl | 1.6MB | |
| shelf_3_60.stl | 1.6MB | |
| shelf_3_80.stl | 1.6MB | |
| shelf_4_100.stl | 1.6MB | |
| shelf_4_120.stl | 1.6MB | |
| shelf_4_140.stl | 1.6MB | |
| shelf_4_160.stl | 1.6MB | |
| shelf_4_180.stl | 1.6MB | |
| shelf_4_200.stl | 1.6MB | |
| shelf_4_40.stl | 1.6MB | |
| shelf_4_60.stl | 1.6MB | |
| shelf_4_80.stl | 1.6MB |
