Six-Shaft Table Loom 3D Printer Model
The file 'Six-Shaft Table Loom 3D Printer Model' is (stl,pdf,ods) file type, size is 10.1MB.
The file 'Six-Shaft Table Loom 3D Printer Model' is (stl,pdf,ods) file type, size is 10.1MB.
This work is the continuation of the 4-shaft table loom that I posted in May 2024. It can be considered as an upgrade with 2 more shaft. Therefore many parts are identical between the 4 and 6 shaft loom.
It allows you to weave a larger number of patterns, over a maximum width of around 40 cm.
Before making it, you should carefully read the description (.pdf file). It takes a long time to 3D print...and you can't print all the parts. You will also need some wood work.
The 3D design was done using FreeCAD. Should you which to modify / improve parts, just contact me so that I can provide the corresponding .FCStd files.
I hope that you will enjoy it!
| A_Chassis_FR.stl | 471.2KB | |
| B_Chassis_FL.stl | 419.8KB | |
| C2_Chassis_BL.stl | 471.7KB | |
| D2_Chassis_BR.stl | 512.3KB | |
| F_Handle.stl | 1.6MB | |
| G_Pawl.stl | 93.7KB | |
| H_Washer.stl | 186.5KB | |
| I_Hub_Handle.stl | 230.1KB | |
| J_Hub_L.stl | 166.0KB | |
| K_Spacer.stl | 18.2KB | |
| L_Rail_Support_v3.stl | 380.1KB | |
| M_Reed_Support.stl | 105.2KB | |
| N1_Levers_Support.stl | 5.1MB | |
| N2_Cover_Central.stl | 18.4KB | |
| N3_Cover_Side.stl | 88.2KB | |
| O_Lever_v2.stl | 148.1KB | |
| P_Shaft_Rail_v2.stl | 3.2MB | |
| Q_Shaft_Side.stl | 293.6KB | |
| R1_Cord_Blocker.stl | 57.9KB | |
| R2_Cord_Blocker.stl | 51.9KB | |
| R3_Cord_Blocker.stl | 27.7KB | |
| Six-Shaft_Table_Loom.pdf | 3.8MB | |
| T1_Rigid_Heddle_v2.stl | 68.8KB | |
| T3_Rigid_Heddle_Emergency.stl | 86.7KB | |
| Tenisen_Ultimate__Weaving_Draft_static.ods | 825.3KB | |
| U1_Reed_157-slots.stl | 345.8KB | |
| U2_Reed_131-slots.stl | 317.0KB | |
| V1_Temporary_Reed_Support.stl | 7.0KB | |
| W_Hook_v2.stl | 103.2KB | |
| X_Shuttle.stl | 2.7MB |
