Sink & Bathroom Plunger 3D Printer Model Free Download

Description Files (9)

Summary

A functional pneumatic plunger to unclog a sink.

How to use:

Screw-in the rod into the cylinder.
Install the pneumatic cylinder. We want a very tight fit, it will settle after a few movements. Use some candle wax around the cylinder to push it inside. Start with the standard cylinder: CYLINDER 0.0 (standard size). Print only this cylinder first.
If it's too tight, print CYLINDER -0.2; it’s a cylinder with 0.2 mm smaller diameter.
If that doesn't work, go to CYLINDER -0.3.
If the standard cylinder doesn’t fit tightly for some reason, try CYLINDER +0.2 or CYLINDER +0.3.
Use an optional skirt for a better suction in some sinks.

Printed at 0.1 mm layer, 20% fill. Supports: NONE. 0.2 mm layer should be OK.

Enjoy

body.STL	3.8MB
cup.STL	3.4MB
cylinder_+0.2_diam_standard_+_0.2_mm.STL	8.0MB
cylinder_+0.3_diam_standard_+_0.3_mm.STL	8.0MB
cylinder_-0.2_diam_standard_-_0.2_mm.STL	8.0MB
cylinder_-0.3_diam_standard_-_0.3_mm.STL	8.0MB
cylinder_0.0_standard_diameter.STL	8.0MB
shaft.STL	3.3MB
soft_skirt_optional.STL	2.0MB