Single Print Padlock 3D Printer Model
The file 'Single Print Padlock 3D Printer Model' is (STL) file type, size is 7.5MB.
The file 'Single Print Padlock 3D Printer Model' is (STL) file type, size is 7.5MB.
My vision for this was to create a lock that would keep small children out but still let others have easy accsess
This is a first draft (now a 4th draft "Padlock 4" as of 2-18-2018)
Any makes and/or suggestions will be appreciated
Padlock 3:
The shackle in "Padlock 3" is 15mm taller than version 2 and the amount of supports needed has been reduced by a fair amount. (see print settings)
The slot in the bottom for turning the lock has been changed to a hex and two holes have been added to spread out the force needed to break it free. ( I will make a key for this if needed)
An extra hole has been added to the side to help remove supports (may not be needed but thought it would help)
Padlock 4:
more supports were removed to help break the lock free.
some side ports were not needed and were removed
this version has a bigger key hole
| Padlock_4.STL | 69.9MB |
