Could it be the first ever? A single print, 3-in1 Smartphone Mount? It's a camera, remote viewing monitor, video screen, head lamp and much more, all in one!

Here's an intensely amateurish vid of all three mounting methods:

https://www.youtube.com/watch?v=HPdxDV0K5Hw

Three sizes for four iPhones;

CrocEye55.stl - iPhone 4 and 5 (58.6mm width)
CrocEye63.stl - iPhone 6 (67mm width)
CrocEye74.stl - iPhone 6plus/Nexus 6p (77.8mm width)
CrocEye57_Tripod.stl - iphone 4 and 5 w/o Sleeve
CrocEye63_Tripod.stl - iphone 4 and 5 w/ Sleeve
CrocEye65_Tripod.stl - iphone 6 and 7 w/o Sleeve
CrocEye67_Tripod.stl - iPhone 6 and 7 w/Sleeve (tighter fit)
CrocEye69_Tripod.stl - iphone6 and 7 w/ Sleeve
CrocEye77_Tripod.stl - iphone 6+ and 7+ w/Sleeve
CrocEye79_Tripod.stl - iphone 6+ and 7+ w/Sleeve (looser fit)
CrocEye83_Tripod.stl - Samsung Note4 w/Sleeve

The size of the nylon strap used in the video was 25mm width.

The size of the nut used for all three models is 1/4" x 20tpi (standard size for most tripod mounting screws)

Face it, your life just got 20x better! You're welcome! :D

If you found this useful, please make sure you share a picture (it makes my day each time someone prints something I designed) and be sure to peruse my other submissions which are almost as varied as they are many:

http://www.thingiverse.com/3E8/designs

Enjoy!

March 28th, 2016 update: Added a camera-mount base to the 63mm version for my iPhone 5s that always has a sleeve on. Let me know if the others need one too. :)

December 21st, 2016 update: Added another two sizes: 77mm and 83mm for iPhone6s and Samsung Note4 (with sleeves)

February 13rd, 2018 update: Added two more sizes: 57mm tripod size for iPhone4 and iPhone5 without a sleeve and 65mm tripod size for iPhone6 w/sleeve

February 14th, 2018 update: Happy Valentines day - the 69mm version is for iPhone6 and 7 with sleeves. Enjoy it on many levels. :3