Single Fat Ball Feeder 3D Printer Model
The file 'Single Fat Ball Feeder 3D Printer Model' is (stl) file type, size is 8.5MB.
The file 'Single Fat Ball Feeder 3D Printer Model' is (stl) file type, size is 8.5MB.
Single fat ball feeder.
Initially designed as a ground based feeder, but added loops to allow to be hung.
120mm across at base and 78mm high.
The lid is slip on as was designed for someone with limited grip (i.e. finds it hard to undo things).
Updated the ring around the bottom. May tweak this more in the future.
Made an indent under the main body and created a "spike" to go in it. Designed to fit inside the metal tubes that hold garden lights as the lady had several lights that didn't work.
Have printed all versions of this and all look ok so far. You will need supports for the body and probably the lid also.
This is only the 2nd thing i've made with F360 (first one was a door wedge!) so please go easy on me!
All constructive criticism is greatly appreciated.
UPDATE 24/7/20....
Added v15 lid and v11 body.
removed the side hooks from the body and made the lid a screw on.
Hanging loop now on the lid.
Shouldn't need supports anymore, but you know your printer!
| Fat_Ball_Feeder_v11_Body.stl | 6.5MB | |
| Fat_Ball_Feeder_v15_Lid.stl | 773.3KB | |
| Fat_Ball_Feeder_v2_Body.stl | 2.9MB | |
| Fat_Ball_Feeder_v2_Lid.stl | 228.7KB | |
| Fat_Ball_Feeder_v3_Body.stl | 2.0MB | |
| Fat_Ball_Feeder_v6_Body.stl | 6.6MB | |
| Fat_Ball_Feeder_v6_Lid.stl | 255.2KB | |
| Fat_Ball_Feeder_v6_Spike.stl | 1.0MB |
