Installation photos show an older design that did not use bolts to keep faceplate attached.
Allows one to mount a 52mm gauge in the cubby below the radio in a B5.5 Passat (or other vehicles). Radio is a single DIN, and underneath is a single DIN cubby/shelf.
Hole for the gauge is angled slightly towards the view of the driver to aid in easier viewing.
Print with faceplate facing down and base of the cubby facing down as well.
Requires four (4) M3x12 socket cap screws and four (4) M3 hex nuts. Hex nuts are captured in the pockets. They are press fit into the pocket. May need to add additional clearance to prevent cracking.
| angled_DIN_faceplate.STL | 82.5KB | |
| cubby_top_section_bolted.STL | 135.1KB |
