Single Can Peltier Minifridge 3D Printer Model
The file 'Single Can Peltier Minifridge 3D Printer Model' is (stl) file type, size is 84.6KB.
The file 'Single Can Peltier Minifridge 3D Printer Model' is (stl) file type, size is 84.6KB.
I had a 40mm peltier unit, some 40 x 40 x 20mm heatsinks, and some 70mm x 10mm fans lying around and wanted to have a use for them.
The only hardware you need are securing the fans to the Exhaust.stl and some thermal glue for the heatsinks to bond to the peltier.
I designed this single can mini-fridge it can work with either one heatsink and fan or two.
If you decided to go with the dual heatsink and fan you will need two Exhaust.stl.
Function with one fan and heatsink will be placed on the hotside in the bottom of the base to exhaust the air out the bottom. The cold side of the peltier will be sticking just above the Intake.stl and can have an aluminum or copper plate placed on top to transfer into to cool down your soda.
Function with two fans and heatsinks, you will assemble everything the same way as the one fan version. However you need a second Exhaust.stl printed and second heatsink. This will have the fan on top pulling the cold off the heatsink to cool down the chamber.
This is still a work in progress I have completed one already and it does work but could use some remixing to help functionality and cosmetic appearance.
| Base.stl | 62.0KB | |
| Cover.stl | 53.8KB | |
| Exhaust.stl | 129.8KB | |
| Intake.stl | 89.4KB | |
| Lid.stl | 37.4KB |
