Multi-color Layered Print Simpsons Family Ornament
Each color is designed to stop at a specific height, so you can print this with a single-head printer as a single piece! Set slicer to change filament at each respective layer.
Slice it yourself, adding settings for filament changes, or use the included .stl file that is ready to go and has filament changes at layers.
Black: 1-12
Green: 13-14
Red: 15-16
Brown:17-18
Blue: 19-20
White: 21-22
Yellow: 23-24
Black: 25
Note 1: When scaling the ornament to a smaller size, reducing the height will reduce the 0.2 mm allowance for each colored layer. If reduced too far, you won't have individual layers for each color. I recommend only scaling length and width, while leaving the height at 5 mm.
If you like my work, please consider supporting me with a few $.
PayPal: [email protected]
Thank you!
| Simpsons_Family_Ornament_-_Deeper_Layers.stl | 1.5MB | |
| Simpsons_Family_Ornament_-_Deeper_Layers_-_Filament_Change.gcode | 5.2MB |
