Here are my STL files for my DIY Hotas project.
This is not a plug-and-play project. You need loads of auxiliary parts to get it working. You need bolts, bearings, magnets, hall sensors. You also need to come up with your own joystick base (or mount), grip design, electronics.
Hole dimension for bolts and bearings were hand-adjusted in the technical designs to match the hardware. It most certainly will not make a perfect fit on your own printer.
| centering_disk_7.4mm.stl | 272.0KB | |
| Centering_ring.stl | 537.9KB | |
| Gimbal_v2.stl | 347.5KB | |
| Gimbal_v2b.stl | 687.0KB | |
| Gimbal_v2c.stl | 616.8KB | |
| Housing_v2.stl | 1.1MB | |
| sensor_bracket.stl | 476.8KB | |
| Spring_Adapter_v2_plus_support.stl | 571.3KB | |
| Tension_ring.stl | 384.3KB | |
| Throttle_v2a.stl | 336.4KB | |
| Throttle_v2b.stl | 410.8KB |
