This is a simple model toy car. Don't feel bad if you can't print the side mirrors, or if they snap off. They are very small and fragile. Leave a comment if you want to see any changes or have questions/concerns. Have fun!
Please support my Maker World! https://makerworld.com/en/@5252
Recommended Settings:
Filament type: PLA
Layer height: 0.2 mm
Speed: Around 100mm/s
Infill: 10% with any pattern
Wall loops: 3
Support: Yes
Bed Adhesion: None
| Car.stl | 1.1MB |
