Printed on my Creality CR10S, with 0,4 mm nozzle, 0,2 mm layer height. You can use even finer resolution if you want your print to be perfect. There are currently ten different versions of toothpick holder. Choose your favorite. Feel free to resize in slicing software. Enjoy...
Holders 6 & 9 need to be printed with 0% infill, at least 1 mm wall and bottom thickness, no top layer!
If you like this model, feel free to live a donation, so I can make more models. Every dollar helps. Thanks :)
| Holder_0.stl | 20.6KB | |
| Holder_1.stl | 165.9KB | |
| Holder_2.stl | 517.5KB | |
| Holder_3.stl | 712.8KB | |
| Holder_4.stl | 101.4KB | |
| Holder_5.stl | 177.8KB | |
| Holder_6.stl | 1.7KB | |
| Holder_7.stl | 26.4KB | |
| Holder_8.stl | 6.9KB | |
| Holder_9.stl | 3.9KB |
