Simple Stacking System 3D Printer Model
The file 'Simple Stacking System 3D Printer Model' is (stl) file type, size is 1.3 MB.
The file 'Simple Stacking System 3D Printer Model' is (stl) file type, size is 1.3 MB.
Just another stacking container system.
Original size is 50x50x60mm but u should be able to scale it in ur slicer in case needed.
Parts fit tight so make sure ur printer is calibrated.
On the file list CT = Clean Top ; CR = Clean Right and so on...
Edit:
I edited the fittings to be a bit more loose, since connecting single boxes worked well but connecting edges was a little too hard. Now everything should fit a little bit easier.
Let me know how it works for u.
In case u have any suggestions on drawers etc. let me know.
| SimpleStackingSystem.stl |
| SimpleStackingSystem_CL.stl |
| SimpleStackingSystem_CR.stl |
| SimpleStackingSystem_CT.stl |
| SimpleStackingSystem_CT_CL.stl |
| SimpleStackingSystem_CT_CR.stl |
| SimpleStackingSystem_Drawer.stl |
| SimpleStackingSystem_Drawer_high_sides.stl |
