A simple sprung bolt for light use.
The spring sections are 0.6mm
Hope someone finds it handy.
Cheers
Update:
After using it for a while I have made some adjustments.
I found that the internal slope needed a little more clearance as it started to clamp the bolt if I tightened it down hard.
Also I changed the shape of the tip of the bolt slightly so it's more forgiving if things aren't 100% aligned when closing.
The bolt and staple are now separate files and there are two extra variations on the bolt.
I for the application i am using it for i do not require the staple and i needed a thin bolt but others may not so there is a version with a fatter bolt.
Cheers
| sprung_bolt.stl | 614.7KB | |
| sprung_bolt.stp | 438.6KB | |
| sprung_bolt_fat.stl | 617.2KB | |
| sprung_bolt_fat.stp | 440.5KB | |
| sprung_bolt_staple.stl | 264.7KB | |
| sprung_bolt_staple.stp | 149.3KB | |
| sprung_bolt_tall_handle.stl | 691.0KB | |
| sprung_bolt_tall_handle.stp | 521.4KB |
