Simple Octo Rocket 3D Printer Model
The file 'Simple Octo Rocket 3D Printer Model' is (stl) file type, size is 282.6KB.
The file 'Simple Octo Rocket 3D Printer Model' is (stl) file type, size is 282.6KB.
Simple, eight-sided model rocket designed for nose cone separation after timed delay. Uses Estes C6-3 or C6-5 Engines.
Have Fun.
My kids enjoy these and like creating their own in various colors and fin designs.
This simple rocket stands approximately 300mm (12 inches) tall and has a 30mm (point to point) body diameter. The fins span 130mm.
Also included files with supports
The base has an integrated rod guide and four fins. The nose cone is hollow and could carry a small (lite) payload. The upper stage is hollow and would contain the parachute or ribbon streamer to slow the descent. The lower stage and nose cone cap have attachment points for the tether. The engine cap twists on to prevent engine blow-out during parachute charge.
ALWAYS LAUNCH SAFELY AND IN OPEN AREAS.
See instructions...
| Octo_Base_Stage.stl | 195.7KB | |
| Octo_Base_Stage_-_Supports.stl | 255.6KB | |
| Octo_Engine_Cap.stl | 92.4KB | |
| Octo_Lower_Stage.stl | 93.7KB | |
| Octo_Lower_Stage_-_Supports.stl | 113.3KB | |
| Octo_Nose_Cone.stl | 52.6KB | |
| Octo_Nose_Cone_-_Supports.stl | 62.8KB | |
| Octo_Nose_Cone_Cap.stl | 37.2KB | |
| Octo_Upper_Stage.stl | 38.6KB | |
| Octo_Upper_Stage_-_Supports.stl | 48.7KB |
