Very simple plate to use on top of a Walksnail Avatar 2.0 VTX. Holds the VTX down and has holes for a 32mm fan (I used a 5v 32mm hole placement fan). Printed in PETG at 50% infill. Works great so far in adding HD to my Traxxas Slash 2wd FPV setup.
I used fairly long m2 screws from the top putting bolts on the top of the VTX to hold down the camera mount on one side, and bolts on the bottom to hold down the antenna connector cover, then bolts through the case of the car to hold it all in place. The fan holes threaded nicely without bolts for the 5v fan I used. I drilled mounting holes in the Slash base using the plate as a guide pre assembly. It worked best drilling the holes a little larger than the m2 screws to allow for easy insertion with the VTX mounted to the plate.
I'm running the fan from the VXL-3S speed controllers fan connector, and then using a boost converter to bring that voltage up to 12v for the VTX/Camera.
Sample video: https://youtu.be/n0ZqQWUP88Q
| simple_vtx_fan_mount.stl | 62.9KB |
