***read updates at the bottom
Simple Drawer design including all files (.123dx; STL; gcode)
Outer dimensions: width 295.688mm, length 265.032 mm, height 68.875mm
Inner dimensions: width 238.452 mm, length 238.452 mm, height 60.807 mm
Files with 95 in their name are reduced 5% in dimension - this is my personal settings as that was the max size that fitted onto my Ender printer.
Included:
All files : 123 design Project (everybody may change or remix for non-commercial use)
(temp. removed - will be resliced) .gcode : The drawer contains ready to print gcode for Ender 3 series, sliced with Simplify3d as 1 piece or divided into drawer itself and drawer frame.
Since my machine is busy, didn't print it yet. I'll be updating the comment after my first print.
Update:
Parts should be inter-fitting
Dimensions stated above may vary at this point (maybe around some couple mm at max)
| drawer1_0.123dx | 99.2KB | |
| drawer_95_only_drawer_thinnerwalls.123dx | 94.1KB | |
| drawer_95_v2_combined_with_screwholes.stl | 2.2MB | |
| drawer_95_v2_frame_with_screwholes.stl | 867.8KB | |
| drawer_95_v2_onlydrawer_thinwalls.stl | 7.5MB | |
| drawer_v1_combined.123dx | 109.8KB | |
| drawer_v2_combined_with_screwholes.stl | 2.2MB | |
| drawer_v2_frame_with_screwholes.stl | 4.7MB | |
| drawer_v2_onlydrawer_thinwalls.stl | 7.5MB | |
| sehlf_v1_95_1piece_no_screwholes.stl | 11.1MB | |
| sehlf_v1_95_1piece_no_screwholes_thinwalls.stl | 2.1MB | |
| sehlf_v1_95_drawer.stl | 7.3MB | |
| sehlf_v1_95_frame.stl | 3.8MB | |
| shelf_95_drawer_thinnerwalls.stl | 7.4MB |
