Simple Conveyor Belt 3D Printer Model
The file 'Simple Conveyor Belt 3D Printer Model' is (stl) file type, size is 113.6KB.
The file 'Simple Conveyor Belt 3D Printer Model' is (stl) file type, size is 113.6KB.
Featured in: https://youtu.be/zpzMnF_jOWc
This is a 3D printed Conveyor Belt, designed as part of the Drinks Serving Machine: https://www.ThatRobotGuy.co.uk/drinks-serving-robot/
You need to print both the left and right sections and 2 rollers and then add as many middle sections as you require for the length. Each section is 180mm long (printed upright) and 100mm wide, though this can be rescaled for any length or width.
The belt is made from PVC table cloth and attached together using a hot glue gun, though superglue or PVA glue also works. It uses a Nema17 on each end to drive the roller. A 608rs skateboard bearing is used to hold the roller in place.
Attachments:
Drinks dispenser: https://www.thingiverse.com/thing:3036233
https://www.ThatRobotGuy.co.uk/drinks-tap/
Automated Cup Dispenser: https://www.thingiverse.com/thing:3031499
https://www.ThatRobotGuy.co.uk/cup-dispenser/
Straw Dispenser: https://www.thingiverse.com/thing:3036242
https://www.ThatRobotGuy.co.uk/straw-dispenser/
Build instructions, code, diagrams and other robots can be found on my site:
https://www.ThatRobotGuy.co.uk/conveyor-belt/
Support me on Patreon: https://www.patreon.com/ThatRobotGuy
| connector.stl | 9.5KB | |
| Left_Section.stl | 111.4KB | |
| Middle_Section.stl | 87.7KB | |
| Right_Section.stl | 111.4KB | |
| Roller.stl | 174.9KB |
