Printed on my Creality CR10S, with 0,4 mm nozzle, 0,3 mm layer height. There are currently five different versions of this candlestick. Choose your favorite. You will need one pair of each spacers. I prefer to use big ones between top and bottom, and small ones for bottom. I used a drop of superglue to hold everything together. Enjoy...
Caution: PLA and other filaments are flammable. Pay attention while manipulating with fire near them.
If you like this model, feel free to live a donation, so I can make more models. Every dollar helps. Thanks :)
| Bottom_1.stl | 3.8KB | |
| Bottom_2.stl | 85.4KB | |
| Bottom_3.stl | 5.7KB | |
| Bottom_4.stl | 30.0KB | |
| Bottom_5.stl | 213.9KB | |
| Spacer_big.stl | 684.0B | |
| Spacer_small.stl | 684.0B | |
| Top_1.stl | 51.8KB | |
| Top_2.stl | 601.1KB | |
| Top_3.stl | 53.8KB | |
| Top_4.stl | 76.4KB | |
| Top_5.stl | 262.0KB |
