Printed on my Creality CR10S, with 0,4 mm nozzle, 0,3 mm layer height. There are currently eight different versions of this candlestick. Choose your favorite. You will need four of each spacers. I prefer to use big ones between top and bottom, and small ones for bottom. Use raft for spacers. Use a drop of superglue to hold everything together. I hope your painting skills are better then mine... :D
Caution: PLA and other filaments are flammable. Pay attention while manipulating with fire near them.
If you like this model, feel free to live a donation, so I can make more models. Every dollar helps. Thanks :)
| Bottom_1.stl | 92.7KB | |
| Bottom_2.stl | 320.9KB | |
| Bottom_3.stl | 78.8KB | |
| Bottom_4.stl | 160.4KB | |
| Bottom_5.stl | 79.6KB | |
| Bottom_6.stl | 100.3KB | |
| Bottom_7.stl | 121.8KB | |
| Bottom_8.stl | 203.0KB | |
| Spacer_big.stl | 8.5KB | |
| Spacer_small.stl | 8.5KB | |
| Top_1.stl | 82.3KB | |
| Top_2.stl | 310.5KB | |
| Top_3.stl | 63.8KB | |
| Top_4.stl | 145.4KB | |
| Top_5.stl | 64.5KB | |
| Top_6.stl | 85.2KB | |
| Top_7.stl | 106.7KB | |
| Top_8.stl | 188.0KB |
