Simple Bolt Action Pen 3D Printer Model
The file 'Simple Bolt Action Pen 3D Printer Model' is (stl) file type, size is 40.7KB.
The file 'Simple Bolt Action Pen 3D Printer Model' is (stl) file type, size is 40.7KB.
My Printables Profile https://www.printables.com/social/245310-strik3forc3/models
Thingiverse is dead, i moved all my stuff to Printables.com, the stuff i uploaded here is outdated.
On Printables all my projects are now uploaded with step files for easy Editing.
i also updated some projects and improved them!
Just a really simple Bolt action pen made out of two pieces
what you'll need:
1x M3 Screw
1x Pen Spring
1x pen mine
the pen mine should be 88 mm (like on the picture) or it won't fit right
IMPORTANT
Print the "Main pen" at a maximum layer high of 0.2mm and with a higher temperature as normal (i printed it with 215c)
print the "pen stop" with a resolution of 0.1mm or 0.12mm if you print it with bigger layers the two pieces rub against each other and make it hard to use the pen
place the pen stop in the right orientation, you need to place the smaller end (the top part if you open the stl) on the side of the pen mine (you can try both orientations just look where the mine head comes out further)
Donate if you want, need more Filament for other Projects/Prototypes ;)
| Main_Pen.stl | 87.9KB | |
| pen_stop_2.9.stl | 58.4KB |
