Simple Bias Tape Maker Tool, Zakladac Pasku – 3cm / 3.5cm / 4cm (1,5 In) / 5cm 3D Printer Model
The file 'Simple Bias Tape Maker Tool, Zakladac Pasku – 3cm / 3.5cm / 4cm (1,5 In) / 5cm 3D Printer Model' is (stl) file type, size is 3.0MB.
The file 'Simple Bias Tape Maker Tool, Zakladac Pasku – 3cm / 3.5cm / 4cm (1,5 In) / 5cm 3D Printer Model' is (stl) file type, size is 3.0MB.
This is a minimalistic version of the tool for folding a cloth strip into a rope.
It is designed to be rapidly printed.
Other sizes to be added later
Latest version: _Q2.stl
_Q3* have wider output slit (mostly applicable to U fold tools)
Available sizes:
Hint for the imperial units users:
(cloth strip widths before sewing)
1 in = 2.54 cm --> you may try 3 cm tool
1+1/4 in = 3,2 cm --> you may try 3 cm tool
1+1/2 in = 3,85 cm --> use 4 cm tool
2 in = 5.08 cm --> use 5m tool
All widths now with wings. Hooray!
Settings info:
No infill is intended, a brim shall not be needed
For further print speed up; disable Gap Fill in your slicer.
It will get rid of small unnecessary fillings in corners that take too much time.
(Slic3r or PrusaEdition: Speed -> Gap Fill = 0 mm/s)
Modifications:
Version Q2 has wider input slit.
Version Q3 has wider output slit.
This model is heavily inspired by:
https://www.thingiverse.com/thing:3880491 (Oscarko)
Thank you for the idea.
| 3.5cmBiasTape_Q2_wings.stl | 563.2KB | |
| 3.5cm_BiasTape_minimalistic_Q2.stl | 486.8KB | |
| 3cm_BiasTape_Q2.stl | 459.0KB | |
| 3cm_BiasTape_Q2_wings.stl | 530.2KB | |
| 4cmBiasTape_Q2.stl | 428.8KB | |
| 4cmBiasTape_Q2_wings.stl | 500.6KB | |
| 4cmBiasTape_Q3_fold_U.stl | 1.9MB | |
| 4cmBiasTape_Q3_fold_U_wings.stl | 1.9MB | |
| 4cm_Tape_U_fold.stl | 1.4MB | |
| 5cmBiasTape_Q2.stl | 480.0KB | |
| 5cmBiasTape_Q2_wings.stl | 559.0KB |
