Simple Aircraft (enforced) 3D Printer Model
The file 'Simple Aircraft (enforced) 3D Printer Model' is (stl) file type, size is 1.8MB.
The file 'Simple Aircraft (enforced) 3D Printer Model' is (stl) file type, size is 1.8MB.
Remixed simple aricraft
This thing was designed to be easy to print and for small kids: without sharp edges and durable.
All connections were adjusted to be connected by M3 bolts
Use 5 bolts M3x12mm (or it can be 10mm but 2 of them is better to have 12 or 15mm)
There are mods v2 and v3. Difference is in 2 parts - v2 is vertical printed aircraft fuselage, v3 has horisontal aircraft fuselage
To print v2(vertical fuselage) use parts:
airplain2-wheel.stl
airplain2-p4.stl
airplain2-p3.stl
airplain2-p2.stl - orient it to print vertically but use brim or other tricks to keep it verical (I've used only 10mm brim)
airplain2-p1.stl
To print v3(horisontal fuselage) use parts:
airplain2-wheel.stl
airplain2-p4.stl
airplain2-p3.stl
airplain3-p2.stl - orient it to print horizontally
airplain3-p1.stl
Update: 27.04.2018
Based on kids tests added a reinforced propeller airplain2-p4b
| airplain2-p1.stl | 301.7KB | |
| airplain2-p2.stl | 1.1MB | |
| airplain2-p3.stl | 901.9KB | |
| airplain2-p4.stl | 444.8KB | |
| airplain2-p4b.stl | 654.2KB | |
| airplain2-wheel.stl | 782.3KB | |
| airplain3-p1.stl | 298.5KB | |
| airplain3-p2.stl | 1.1MB |
