Sim Racing Flag And Spotter 3D Printer Model
The file 'Sim Racing Flag And Spotter 3D Printer Model' is (stl) file type, size is 43.9KB.
The file 'Sim Racing Flag And Spotter 3D Printer Model' is (stl) file type, size is 43.9KB.
A flag or spotter matrix LED array for sim racing.
You'll need the following:
Matrix LED PCB:
https://de.aliexpress.com/item/32652524641.html?spm=a2g0o.order_list.order_list_main.140.41435c5fNwfGF4&gatewayAdapt=glo2deu
Arduino Pro Micro (USB-C / Micro-USB)
https://de.aliexpress.com/item/32768308647.html?spm=a2g0o.order_list.order_list_main.54.41435c5fNwfGF4&gatewayAdapt=glo2deu
4x M3 inserts for the front, 2-6x M4 inserts for the back, 4x M3 countersunk screws, 2x M4 screws, 1x M8 screw and T-nut, some wires
Setup is easy, connect DIN (LED Matrix) -> 4 (Arduino), +5V -> VCC, GND -> GND
For software SimHub was used, just install it through "Arduino" -> "My Hardware" -> "Setup tool" and choose the correct Arduino and LED Matrix with the connector being "4"
Update 1, 27.10.2024:
Added an optional transparent lens to cover the LEDs
| Sim_Flag_Back.stl | 113.4KB | |
| Sim_Flag_Front.stl | 57.9KB | |
| Sim_Flag_Halter.stl | 25.7KB | |
| Sim_Flag_Lens.stl | 36.6KB |
