Silly Walks Clock 3D Printer Model
The file 'Silly Walks Clock 3D Printer Model' is (zip,stl) file type, size is 2.7MB.
The file 'Silly Walks Clock 3D Printer Model' is (zip,stl) file type, size is 2.7MB.
This another version of the Monty Python's Ministry of Silly Walks wall clock.
Based on the stencil prepared by Jan Flaška, modified substantially.
This clock has been designed to fit the TFA 60.3525.01 (radio controlled) and TFA 60.3024.01 (manual) clock movements, but any movement that has 8 mm shaft and can accommodate a 5 mm thick dial will fit.
If you are going to use a different movement, you may have to modify the hole diameters on the legs.
Total dimensions:
Width: 198 mm
Height: 198 mm
Thickness: 46 mm
Movement specs that don't require any model changes:
Shaft diameter: 8 mm (0.295 inch)
Shaft length (thread): 7 mm (9/32 inch) (the clock dial thickness around the hole is 5 mm)
Hour shaft diameter: ~5.05 (0.199 inch)
Minute shaft diameter: ~3.17 mm (0.122 inch)
Look for a movement with a set of hands to have the seconds shown.
If you can get a full set of accessories, you won't even need to print any of the holders.
Some 12888 or 12888S (S for Silent) movements with white hand shafts appear to match.
If you're in Europe you can get also some DCF radio controlled movements.
| SillyWalksClock_TFA-60.3024.01.zip | 728.4KB | |
| SillyWalksClock_TFA-60.3525.01.zip | 747.9KB | |
| Silly_Walks_Clock_TFA-60302401_Face.stl | 1.5MB | |
| Silly_Walks_Clock_TFA-60302401_Frame.stl | 836.5KB | |
| Silly_Walks_Clock_TFA-60302401_Holder.stl | 181.9KB | |
| Silly_Walks_Clock_TFA-60302401_Legs.stl | 557.8KB | |
| Silly_Walks_Clock_TFA-60352501_Face.stl | 1.5MB | |
| Silly_Walks_Clock_TFA-60352501_Frame.stl | 845.4KB | |
| Silly_Walks_Clock_TFA-60352501_Holder.stl | 180.6KB | |
| Silly_Walks_Clock_TFA-60352501_Legs.stl | 562.3KB |
